Second night:
Got the non-chlorinated brake cleaner and cleaned the goo as described. Used pencil torch and "played" the flame across the connectors to remove the daughtercard. Cleaned up a couple of pins which had excess solder using a small soldering iron. Installed EBL. Used dremel to cut out the case for access to the new connectors. The calpack has a line marking pin 1, and the eprom has a divit in the top. The EBL board has a divit marking pin 1 on each as well.
Tried loading the included bin file in promedit with the included ecu file. Bzzzt. No joy.
No comments:
Post a Comment